OASE BEST LED-222 

[view large image]

[view large image]

The flush-mounted LED fixtures are suitable for almost anything. They can be built into almost any natural stone or paving covering. This makes them ideal for use in pool installations without open water surfaces. Nozzles can be integrated in the middle of the LED spotlights if the spotlights will be used to illuminate fountains. Thus attractive symmetric illumination with continuously changing color nuances is produced. However these robust color wonders show their full strength when combined with OASE Vario-Switch or Varionaut DMX-controlled pumps. In combination, they allow for a completely new composition of open space and fountain installations.

Key Features

	High -performance LED ground-installed spotlight
	Integrated electronics
	Centered opening for different-size nozzles Recommendation: Comet 10-12 L / Comet 10-14L
	Edge mounting stainless steel
	Extremely long operating life
	Extremely compact design
	Multi-color switchable
	Ideal in combination with the Vario-Switch and Varionaut DMX-controlled pumps
	Can be individually controlled via Easy Control

Warranty

1-year manufacturer's limited warranty

IMPORTANT

Ships from Oklahoma

OASE Easy Control

[view large image]

Laptop not included. PC or laptop is only needed for initial programming. It does NOT have to be permanently connected.
[view large image]

IMPORTANT

	A maximum of 32 devices (receivers) can be connected to one DMX line
	To ensure correct signal transmission, the DMX line should not exceed a length of 330 ft.
	DMX-capable devices are equipped with standardized 5-pole XLR connectors
	Control devices and transmitters have female connectors
	Receiving devices (e.g. dimmer packs, Jumping Jets, etc.) have male connectors
	Not for use in swimming pools or salt water
	Ships from Oklahoma

With the OASE Easy Control you can easily program your system from a PC or laptop - on a well-organized user interface, with freely progammable sequential programs of up to 512 programmable channels, and everything is transmitted simply via USB.

The Device is Quite Simple to Operate
The interface module is connected to a laptop or PC via USB connectors, the software is installed, and you are ready to program. Thanks to the well organized and clearly structured user interface you can create sequential programs without programming skills. The interface module has 256 channels that can be controlled individually. Signals are transmitted via DMX-512

DMX in Detail: Information on the Transmission Protocol
The transmission protocol for our components (e.g. BEST LED, Jumping Jet, etc.) is sent via a serial bus system (in accordance with the industrial protocol RS 485).

The protocol is based on DMX-512 or DMX-512/1990 and originally comes from the application area of stage and show technology. DMX means Digital MultipleXed.

DMX - 512 is an accord concerning the connection between control device (transmitters, such as OASE DMX Easy Control or OASE Musical Fountain Control), and receivers (such as BEST-LED, Jumping Jets, dimmer pack, scanners, etc.).

The data network is structured as a bus topology (daisy chain). The advantage of this structure is that you only need one data line to activate the components (spotlights, Jumping Jet, etc.) because you simply loop the DMX line through from device to device. With DMX-512 up to 512 different information signals can be transferred over one DMX line. A maximum of 32 devices (receivers) can be connected to one DMX line.

Key Features

	Simple programming from PC or laptop
	Clearly organized user interface
	Signal transmission via USB
	Freely programmable sequential programs
	Up to 255 channels can be programmed for standalone operation

Warranty

1-year manufacturer's limited warranty

[view large image]