PRO ECO
PRODUCTS PV-1 Pond Vacuum
[view
large image]
 |
Maximum
suction depth = 8 ft. |
 |
Can remove
dirt particles up to 3/8" in diameter, such as algae, silt, dead plants
and decomposed leaves - a pond vacuum is not suitable for spring-cleaning
a pond full of last year's leaves |
 |
MUST be
plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter)
protected 120 Volt outlet ! |
 |
For safety
reasons, the pond vacuum should be placed a minimum of 7 ft. (2 meters)
from the edge of the pond |
 |
Not approved
for use in swimming pools or salt water |
 |
Ships from
Oklahoma |
|
|
The ProEco
Products PV-1 Pond Vacuum quickly and efficiently removes sludge and debris
from ponds and fountains. The PV-1 Pond Vacuum can also be used as a wet
or dry vacuum, making cleanups around your pond or fountain simple and
easy.
The ProEco
Products PV-1 Pond Vacuum is a single chamber pond vacuum that fills and
empties automatically on a preset timer. Nutrient-rich organic debris and
sludge are removed to the garden.
 |
Can
remove dirt particles up to 3/8" in diameter, such as algae, silt, dead
plants and decomposed leaves |
 |
Electronic
motor control monitors the filling and emptying of the vacuum basin |
 |
Once the
container is full, the motor is automatically turned off |
 |
The collection
container automatically empties |
 |
The discharged
sludge and water can be used on garden beds and shrubs as fertilizer |
 |
20 ft.
long power cord |
 |
Includes
a variety of nozzles for different debris types |
 |
3-year
manufacturer's limited warranty |
 |
18
ft. of suction hose |
 |
8.5 ft.
of discharge hose |
 |
4 extension
tubes |
 |
3 vacuum
heads for different debris types |
[view
large image]
|