MDM SEQUENCE
1000 Series Pumps
[view large
image]
To view this file you need Adobe Acrobat Reader 4.0 or higher. If you do
not already have Adobe Acrobat Reader installed on your computer, please
click on the Adobe logo to download it free of charge.
|
|
The Classic!
The model 1000 series has set the standard by which all others are measured.
This series is a perfect blend of medium pressure and ample flow for the
majority of ponds. Motor is totally enclosed and fan-cooled for durability.
 |
Less
than half the watt draw of comparable submersible pumps |
 |
Ports are
1.5" FNPT suction and 1.5" FNPT discharge |
 |
Units are
pre-wired with an 8' cord and molded 115 V plug |
 |
Housing
is molded of high strength, glass filled polypropylene |
 |
Quiet operation |
 |
Dry run
resistant mechanical seals |
 |
Stainless
steel hardware is standard |
 |
The motors
are TEFC, for excellent protection |
 |
Motors
are aluminum for added weather resistance |
 |
Rebuildable,
industrial grade motors |
 |
Suitable
for waterfalls and water courses |
 |
3-year
manufacturer's limited warranty |
 |
MUST
be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter)
protected 120 Volt outlet ! |
 |
DO NOT
SUBMERSE |
 |
These are
not suction pumps - a priming pot is required (sold separately, please
see below) |
 |
Special
Warranty Information for Sequence Pumps
Due to
the technical nature of these pumps, the pump must be returned and inspected
BEFORE the warranty can be honored - we will assist you with the claim
but you may be required to ship the pump to the manufacturer for warranty
service |
 |
Not approved
for use in swimming pools or salt water |
 |
Ships from
Oklahoma |
[view
large image]
Performance
curve |