Aquascape 6 x 8 DIY Backyard Pond Kit – 6′ x 8′ Ponds (99764)
It doesn’t get any easier. The Aquascape 6 x 8 DIY Backyard Pond Kit includes everything you need to build a pond and your backyard oasis … in one box.
The folks at Aquascape have taken the guesswork out of assembling the products for a pond. No more headaches trying to piece meal fittings and plumbing assemblies. No extensive training to understand what pump to use with what filter. It has all been done for you. Detailed instructions help guide you through the 20-step process.
- The Aquascape 6 x 8 DIY Backyard Pond Kit is easy to set up
- All components are compatible and properly sized
- Plumbing made simple – union coupling allows easy plumbing disconnect
- Fish-safe silicone provides a watertight seal between the pond liner and the Aquascape MicroFalls Waterfall Filter and Aquascape Signature Series 200 Pond Skimmer
- The Aquascape 6 x 8 DIY Backyard Pond Kit includes a 45 mil fish-grade EPDM pond liner, Pond Liner Underlay, Aquascape Signature Series 200 Pond Skimmer, Aquascape MicroFalls Waterfall Filter, Aquascape AquaSurge 2,000 GPH Waterfall Pump, 25 ft. of kink-free tubing, plumbing assembly, all required plumbing adapters and silicone sealant
- Step-by-step, picture-by-picture instructions ensure a successful water garden project for the do-it-yourselfer
- Varies by component, please click on individual components to see manufacturers’ warranties
- Pond size shown is suitable for ponds without fish
- Kit size is calculated using a 24″ pond depth
- Extra pond liner may be required for a waterfall or stream
- Pump must be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter) protected 120 Volt outlet
- The Aquascape 6 x 8 DIY Backyard Pond Kit is not approved for swimming pool or salt water use
|Aquascape Part Number||99764|
|Pond Size||6 ft. L x 8 ft. W x 2 ft. D|
|Estimated Capacity||720 gallons|
|Pump||Aquascape AquaSurge 2,000 GPH Waterfall Pump|
|Pond Skimmer||Aquascape Signature Series 200 Pond Skimmer|
|Pond Filter||Aquascape MicroFalls Waterfall Filter|
|Pond Liner||45 mil fish-grade EPDM
10 ft. x 12 ft.
|Pond Liner Underlay||Pond Liner Underlay
10 ft. x 12 ft.
|Tubing||25 ft. of 1-1/2″ kink-free tubing|
* All figures are based on the following assumptions: Minimum pond depth of 18 inches. Pump and pond filter are operated continuously.
Pond size recommendations are approximate and are only given for general guidance. All performance data were obtained under controlled conditions. Real-world performance may vary due to local circumstances.