Kasco 4400AF 1 HP Surface Aerator – 1 Acre Ponds – WITH Float – WITH Bottom Screen – FREE SHIPPING

$239.25$2,564.00

For ponds up to 1 acre in size. Introduce more oxygen faster with the Kasco 4400AF 1 HP Surface Aerator.

$1,382.00
$1,758.00
$2,340.00
$2,564.00
$239.25

Kasco 4400AF 1 HP Surface Aerator

Introduce more oxygen faster with the Kasco 4400AF 1 HP Surface Aerator. The high-performance design of this aerator uses a single open propeller that creates and pushes water droplets into the air allowing efficient transfer of oxygen to the water. Agitation and movement created by the process spreads the oxygenated water throughout the body of water. The Kasco 4400AF 1 HP Surface Aerator can operate in as little as 19 inches of water. It is ideal for ponds/tanks with surface areas of about 1 acre.

The Kasco 4400AF 1 HP Surface Aerator is a self-contained unit that floats at the surface. With just three mooring lines anchoring the unit and a single power cord running to shore, the Kasco 4400AF 1 HP Surface Aerator is easily installed and maintained by a single person.

The Kasco 4400AF 1 HP Surface Aerator is available in 120 Volt (60 Hz). All units come with a float, three 50 ft. mooring lines and a bottom screen. An optional control panel is also available.

Kasco AF Series Surface Aerators - Optional Bottom Screen

Kasco Bottom Screen

Keeps debris and other material out and ensures proper operation of your unit

  • Protective coated stainless steel
  • 84 vertical screening bars with gaps tapered from .875” to .188” on bottom screen
  • 7.5” H x 23” tapering to 8.25” diameter
  • Protective coated series 300 stainless steel attachment hooks


Key Features

  • The Kasco 4400AF 1 HP Surface Aerator ensures a lower overall operating cost while delivering an extremely high dissolved oxygen level. High-efficiency design means low power consumption and low operating costs.
  • Low maintenance and dependable design.
  • The Kasco 4400AF 1 HP Surface Aerator is manufactured with a hard-face internal mechanical seal for protection against leaks and is flood oil lubricated for excellent heat dissipation.
  • The Kasco 4400AF 1 HP Surface Aerator features a corrosion resistant, stainless steel design which also makes it extremely dependable in salt water applications or other corrosive environments.
  • An easily replaced protective sacrificial zinc anode is included with each unit.
  • Safety Tested: ETL listed to UL and CSA Standards.
  • The Kasco 4400AF 1 HP Surface Aerator increases fish growth and population density while providing efficient water and food circulation with little or no bottom turbulence.
  • The Kasco 4400AF 1 HP Surface Aerator only requires a 19″ operating depth.
  • Choice of Cord Lengths: SJTOW underwater rated power cord length options of 50′, 100′, 150′, or 200′.
  • Made in the U.S.A.


Warranty

  • 2-year manufacturer’s limited warranty


IMPORTANT

  • The Kasco 4400AF 1 HP Surface Aerator is not approved for use in swimming pools
  • Must be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter) protected 120 Volt outlet !


Specifications

Kasco Marine Part Number 4400AF-BTMSCR
Motor 1 HP
Pond Size 1 acre
Power Consumption 1,356 Watts
Amperage 11.3 Amps
Minimum Water Depth Required 19″
Power Cord Lengths 50 ft., 100 ft., 150 ft. or 200 ft.
Weight 60 to 102 lbs. (depending on power cord length)
Float Included yes
Control Panel Included no, C25 panel must be ordered separately
Bottom Screen Included yes
Voltage 120 V, 60 Hz.

 

Accessory Products

Kasco C25 Control Panel

Kasco C25 Control Panel (C-25)

A plug-and-go GFCI protected control panel with 24-hour timer and a photocell controlled outlet for optional lighting.

  • 120V
  • Single Phase
  • 15 Amp

Downloads

PDF File: Kasco AF Series Surface Aerators – Owners & Assembly Manual

PDF File: Kasco 4400AF Surface Aerator Spec Sheet