Aquascape AquaSurge 4000-8000 Pond & Waterfall Pump – 7,793 GPH (45010)
The Aquascape AquaSurge 4000-8000 Pond & Waterfall Pump combines energy-efficient performance, high flow rate and ease of maintenance making this pump the ideal choice for discriminating pond owners.
The Aquascape AquaSurge 4000-8000 Pond & Waterfall Pump is ideal for use in Aquascape and other skimmer and filter systems, as well as Pondless Waterfall Filter Vaults. The Aquascape AquaSurge 4000-8000 Pond & Waterfall Pump can be used vertically or horizontally.
Key Features
- Extremely energy efficient, saving hundreds of dollars over traditional water pumps
- Asynchronous motor technology provides high torque, trouble-free performance at higher head heights
- Designed for use in skimmer and filter systems
- Oil-free design prevents pond contamination
- Provides years of trouble-free operation
- The Aquascape AquaSurge 4000-8000 Pond & Waterfall Pump is made for continuous use
- Will not corrode or rust
- Rubber feet prevent noise and vibration
- Can be used vertically or horizontally
- Allows you to customize and fine tune the flow of waterfalls and streams
- Pump can be turned on or off with remote
- Ideal for use in Pondless Waterfall applications, allowing the falls to be adjusted or turned on and off when desired
- Ability to adjust the flow makes it easy to select a pump for any application
- Each remote and receiver are paired together with a unique frequency
- Remote features numeric flow indicator and a holster allowing for permanent mounting
- Receiver includes mounting hardware
- 20 ft. power cord
|
|
|
Warranty
- 3-year manufacturer’s limited warranty
IMPORTANT
- The Aquascape AquaSurge 4000-8000 Pond & Waterfall Pump must be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter) protected 120 Volt outlet
- The Aquascape AquaSurge 4000-8000 Pond & Waterfall Pump is not approved for use in swimming pools or salt water
Specifications
| Aquascape Part Number | 45010 |
| Maximum Flow Rate | 7,793 GPH |
| Maximum Head | 28 ft. |
| Power Consumption | 500 – 660 W / 5.5 A Wattage range depends on remote control flow setting |
| Discharge | 1-1/2″ MPT (male threaded) includes 1-1/2″ FPT (female threaded) adapter |
| Tubing Connection | 1″, 1-1/4″, 1-1/2″, 2″ |
| Power Cord Length | 20 ft. |
| Voltage | 115 V, 60 Hz. |
| Dimensions | 14″ L x 6″ W x 7.5″ H |
