PerformancePro Artesian Pro AP 1/2-HF High Flow Waterfall Pump – 8,880 GPH – FREE SHIPPING

$110.00$1,164.70

8,880 GPH. The PerformancePro Artesian Pro AP 1/2-HF High Flow Waterfall Pump is the pump you need for your higher flow applications.

$1,164.70
$188.45
$110.00
$119.70
$349.98
$449.98

PerformancePro Artesian Pro AP 1/2-HF High Flow Waterfall Pump – 8,880 GPH

The PerformancePro Artesian Pro AP 1/2-HF High Flow Waterfall Pump is the pump you need for your higher flow applications. It not only delivers great flow rates at useable heads, but it does so efficiently! You get the safety and convenience of self-priming along with great energy savings. For ease of use, the PerformancePro Artesian Pro AP 1/2-HF High Flow Waterfall Pump provides a large strainer basket and an easy open Lexan lid. The specially designed lid and clamp ring insure a positive seal with very little o-ring wear.


Key Features

  • Money-saving high efficiency pump and motor unit
  • The PerformancePro Artesian Pro AP 1/2-HF High Flow Waterfall Pump is designed to operate anywhere on its performance curve
  • 3″ suction and discharge ports with quick disconnect unions
  • Long-life corrosion resistant 316 stainless steel shaft seals
  • Impeller interchangeability allows you to easily change your pump’s performance
  • Top-of-the-line US motors
  • Motor is totally enclosed for excellent protection and long-term reliability
  • Both pump end and motors are designed for quiet operation
  • A 12 AWG, 8 ft. power cord with 115 V plug is optional
  • A salt water kit is available separately
  • 5 GPM minimum recommended continuous flow rate
  • Safety first – out of the pond pumps help protect both you and your fish from annoying and potentially dangerous oil or electrical leaks


Warranty

  • 3-year manufacturer’s limited warranty (fresh water applications)
  • 1-year manufacturer’s limited warranty (salt water applications)


IMPORTANT

  • DO NOT SUBMERSE !
  • The PerformancePro Artesian Pro AP 1/2-HF High Flow Waterfall Pump must be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter) protected 120 Volt outlet !
  • Pumps supplied without power cord must be hard-wired to a GFCI-protected circuit by a licensed electrician
  • The PerformancePro Artesian Pro AP 1/2-HF High Flow Waterfall Pump is not approved for use in salt water (a salt water kit is available separately)


Specifications

PerformancePro Part Numbers AP 1/2-HF AP 1/2-HF-C
HP 1/2 1/2
RPM 3,450 3,450
Maximum Flow Rate 8,880 GPH @ 3 ft. 8,880 GPH @ 3 ft.
Maximum Head 38 ft. 38 ft.
Maximum Power Consumption 960 W / 4.3 A 960 W / 4.3 A
Amps @ 230 V @ Max. Head 2.6 A @ 38 ft. 2.6 A @ 38 ft.
Amps @ 230 V @ Max. Flow 3.3 A @ 8,880 GPH @ 3 ft. 3.3 A @ 8,880 GPH @ 3 ft.
Suction 3″ with quick disconnect unions 3″ with quick disconnect unions
Discharge 3″ with quick disconnect unions 3″ with quick disconnect unions
Power Cord Length n/a 8 ft.
Voltage 115 V, 60 Hz.
230 V, 60 Hz.
115 V, 60 Hz.
230 V, 60 Hz.

 

Accessory Products

PerformancePro ProTect - Grey ProTect (MPC-10)
instant protection for your pump and motor
made of UV resistant thermoplastic, insulated with retardant foam for noise abatement
assembly is easy and requires no tools
Saltwater Kit (SWKIT)
includes PVC shaft sleeve and Monel w/ SiC seal installed in pump
High Volume Centrifugal Pump Intake Filter PIF3-PIF4 High Volume Centrifugal Pump Intake Filter – 3″ (PIF3)

  • Intake screen for high volume applications
  • Allows fine particles through, yet still keeps out large objects such as sticks, fish and weeds
  • Made from epoxy-coated heavy gauge galvanized wire
  • Will not rust or corrode
  • Mesh size is 1/2″ x 1″
  • Included PVC swing check valve keeps your pump primed
  • 3″ connection
  • Suitable for maximum flow rate of 13,500 GPH
  • Measures 11″ dia. x 30″ L
High Volume Centrifugal Pump Intake Filter PIF3-PIF4 High Volume Centrifugal Pump Intake Filter – 4″ (PIF4)

  • Intake screen for high volume applications
  • Allows fine particles through, yet still keeps out large objects such as sticks, fish and weeds
  • Made from epoxy-coated heavy gauge galvanized wire
  • Will not rust or corrode
  • Mesh size is 1/2″ x 1″
  • Included PVC swing check valve keeps your pump primed
  • 4″ connection
  • Suitable for maximum flow rate of 21,000 GPH
  • Measures 11″ dia. x 30″ L

 

Downloads

PDF File: PerformancePro Artesian Pro High Flow Waterfall Pumps Performance Curves

You may also like…