ProEco Products SP 1400 Waterfall Pump – 1,400 GPH
The ProEco Products SP 1400 Waterfall Pump is perfectly suited for all waterfall, stream and fountain applications. The Split Tube hybrid motor design makes this pump an ideal blend of performance and efficiency.
The ProEco Products SP 1400 Waterfall Pump also utilizes asynchronous technology which means that it is electronically controllable. The benefit of being electronically controllable is that the output is completely adjustable and the pump only uses the power necessary for the desired flow. Thermal protection is built into the SP 1400 Waterfall Pump to ensure that the pump will protect itself from thermal damage.
The ProEco Products SP 1400 Waterfall Pump also includes a pre-filter to prevent the pump intake from clogging.
Key Features
- Asynchronous motor
- Can be electronically controlled by means of a dimmer switch
- Hybrid mag drive pump
- Pre-filter included
- The ProEco Products SP 1400 Waterfall Pump is thermally protected
- Low power consumption
- Inline capable (with a flooded suction)
- Oil-free – eliminates risk of contamination of aquatic life
Warranty
- 5-year manufacturer’s limited warranty
IMPORTANT
- The ProEco Products SP 1400 Waterfall Pump must be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter) protected 120 Volt outlet
- The ProEco Products SP 1400 Waterfall Pump is not approved for use in swimming pools or salt water
Specifications
ProEco Products Part Number | SP-1400 |
Maximum Flow Rate | 1,400 GPH |
Flow Rate @ 5 Ft. of Head | 1,100 GPH |
Flow Rate @ 10 Ft. of Head | 400 GPH |
Maximum Head | 11.5 ft. |
Power Consumption | 75 W |
Discharge | 1″ MPT (male threaded) (includes female threaded coupling and tubing adapters for 1″ and 1-1/4″ kink-free tubing) |
Power Cord Length | 33 ft. |
Voltage | 115 V, 60 Hz. |
Dimensions | 13″ L x 4.5″ W x 6″ H |
Accessory Products
Atlantic Water Gardens Variable Speed Controller (TWVSC)The Atlantic Water Gardens Variable Speed Controller varies the output of asynchronous pumps wirelessly by remote control or by smart phone by downloading the Android or Apple App! Unlike integrated variable speed controllers, where any failure of pump or controller renders everything non-operational, the Atlantic Water Gardens Variable Speed Controller operates separately from the pump. The Atlantic Water Gardens Variable Speed Controller allows you to set both on and off times as well as drop to 25 % of the total flow, in 10 levels of adjustment. Overriding the control box with the remote control does not change the settings; pump will return to the preset on/off times after the next cycle. When powering on, the Variable Speed Controller sends full power to the pump to get it started and then dials it back down to the level it was on when last turned off.
The Atlantic Water Gardens Variable Speed Controller is as easy to synchronize as it is to control. To synchronize the remote to the Variable Speed Controller, simply plug in the control box and it will automatically search for the nearest remote control. Touching any button on the remote will immediately synchronize it to the control box. To synchronize multiple units to one remote, simply plug in the additional control box you want to synchronize and touch any button on the remote you want to pair with it. |
|
Anjon Variable Speed Controller (VAC15A)The Anjon Variable Speed Controller works with asynchronous pumps up to 500 Watts to control their speed electronically. Think of it as a dimmer switch for your pump. The Anjon VAC15A controller is designed to control the water usage of asynchronous pumps, saving valuable energy by decreasing the flow while you’re away from the pond!
|
|
Anjon Variable Speed Control & Remote (MSVAR)The Anjon Variable Speed Control & Remote works with asynchronous pumps up to 500 Watts to control their speed electronically. Think of it as a dimmer switch for your pump. The Anjon MSVAR controller is designed to control the water usage of asynchronous pumps, saving valuable energy by decreasing the flow while you’re away from the pond! It has a time and flow control feature. The remote works up to 100 feet away and through walls and windows.
|
Replacement Parts
At PondUSA.com we carry a large variety of ProEco Products replacement parts for your ProEco Products SP 1400 Waterfall Pump. Whether you need a new motor, housing or impeller assembly … we can help.