Danner Pondmaster 10 Watt UV Clarifier – 1,500 Gallon Ponds (02910)
The Danner Pondmaster 10 Watt UV Clarifier is unobtrusive, black in color and can be used both in or out of the water to control water borne algae and prevent the spread of disease within your pond. The Danner Pondmaster 10 Watt UV Clarifier includes a Glowing Halo Ring that immediately shows when the UV clarifier is working.
Key Features
- The Danner Pondmaster 10 Watt UV Clarifier can be installed submersed or outside of the pond
- Glowing monitor halo ring is immediately visible from any angle and shows that the unit is working
- Comes with a 9,000 hour UV lamp
- Black color is unobtrusive whether used in or out of water
Warranty
- 1-year manufacturer’s limited warranty
IMPORTANT
- The Danner Pondmaster 10 Watt UV Clarifier must be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter) protected 120 Volt outlet
- DO NOT USE in combination with high-pressure waterfall pumps
- Water has to be pumped through the UVC – do not operate on gravity feed
- Ultraviolet clarifiers eliminate green water – they do not eliminate blanket weed / string algae
- Not approved for use in swimming pools or salt water
Specifications
| Danner Pondmaster Part Number | 02910 |
| Max. Pond Size | 1,500 gallons |
| Max. Flow Rate | 700 GPH |
| UV Power | 10 W |
| Inlet Connection | 3/4″ barbed (fits MM non-kink tubing) |
| Outlet Connection | 3/4″ barbed (fits MM non-kink tubing) |
| Power Cord Length | 18 ft. |
| Voltage | 120 V / 60 Hz. |
| Dimensions | 3″ Dia. x 12-1/4″ L |
Replacement Parts
At PondUSA.com we carry the complete line of Danner Pondmaster replacement parts for your Danner Pondmaster 10 Watt UV Clarifier. Whether you need a replacement UV lamp, a quartz sleeve, a ballast or any other spare parts … we can help.
